The post Ultimate Truck Tent appeared first on The Dunshies.
]]>Like camping and getting outdoors as much as we do? Then maybe the Napier SportZ is the Ultimate Truck Tent.
Maybe your like me, I like to just go, planning and preparing ruins it for me. So, this is my go to tent. I throw it in my truck along with a couple of plano cases I keep on the ready. and go.
The Ultimate Truck Tent is great. Its waterproof, (has a rain guard) tons of window vents, and best of all, its sets up ANYWHERE I go. No more sleeping on lumps and rocks, and if your likely like me, you have ultra plush Fox shocks absorbing your every movement.
- Tent installs in less than 10 minutes
- Works with Bakflip mx4 (see pics)
- kid approved. my kids love it
- wife approved. My wife loves it
Buy it from one of our affiliate page
-
- Napier offers the only truck tents on the market with a full floor, keeping you clean from your truck and dry from the elements
-
- Large interior area with over 5.7 feet of headroom
-
- Full rainfly provides ultimate weather protection
-
- Large 4’ x 4’ awning provides shade and a protected spot for bulky gear
-
- Rear access panel allows you to access the truck’s interior for additional storage and access to power outlets to charge your gear
-
- Color-coded pole and sleeve assembly, makes setup a breeze
-
- Built-in storm flaps in windows and door provide additional weather protection and privacy
-
- 3 large windows and 2 ceiling vents offer optimal ventilation
-
- Keep your gear organized with a gear loft, gear pocket and a built in lantern holder
-
- Expandable carrying bag for easy storage
- DOWNLOAD THE SET-UP INSTRUCTIONS HERE
No, roll bars must be removed in order for the tent to fit snuggly on the truck bed.Can you fit a tent over a bed toolbox?
Yes, the tent can fit around the bed toolbox. However the toolbox minimizes the amount of room in the truck bed. If you have a metal toolbox make sure the corners are not sharp as it may rip the tent fabric.Can you fit the tent over bedside rails?
Yes, if the railings are less than 3″ tall. Any other railings will have to be removed or the tent will not fit properly.Can I drive with the tent set up on the truck?
NO, driving with the tent set up may cause personal injury or damage to your truck.Will the tent fit with a hinged slant-slide tonneau cover?
No, the tent does not work with a hinged slant-slide cover; the tonneau cover will have to be removed before the tent can be used.Will the tent fir with a bed liner?
Yes, the tent will fit with a sprayed or prefabricated liner.
The post Ultimate Truck Tent appeared first on The Dunshies.
]]>The post Car Care Essentials appeared first on The Dunshies.
]]>Car Care Essentials
We enjoy washing and caring for our own vehicles. This is a link to our car care essentials shopping list. (Support our blog by using our links.Thx) Washing your own vehicles can actually be less of a chore with the right equipment. We find its also easier to get the kids involved if they get the use the pressure washer & foam cannon.
Pressure Washer Deals
Adams Polish Deals
Chemical Guys Deals
The post Car Care Essentials appeared first on The Dunshies.
]]>The post Philips Vision LED for Any Vehicle appeared first on The Dunshies.
]]>Philips Vision LED Product description
A breakthrough innovation for your vehicle lighting: replace your light with our robust Philips Vision LED that deliver dynamic lighting for your vehicle, both inside and out. And thanks to our 12+ years lifetime, you will likely never have to replace them again. The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, glove box lights, and license plate lights. All backed by our 12-year limited warranty.
See our video installing the Phillis Vision LED bulbs on our 2017 Ford Raptor
From the manufacturer
Add Style to Your Ride with Philips Vision LED
Stunning Illumination.
Philips Vision LED
Why choose Philips Vision LED lighting for your vehicle’s interior and exterior lighting?
- 12-year limited warranty.
- Street-legal.
- 6000K bright white interior LEDs.
- Instant-on capability with exterior LEDs.
- Extremely robust and moisture proof.
- Heat and vibration resistant.
A Breakthrough Innovation for Your Vehicle Lighting
Replace your standard car lights with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out.
The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, and license plate lights. All backed by our 12-year limited warranty. Please visit our website for more information on the warranty program.
More about Philips Vision LED Interior and Exterior lighting
 |
 |
 |
|---|---|---|
Interior lighting: 6000K Bright white lightUpgrade your style with the latest technology. Light up your vehicle interior with our Philips Vision LEDs that provide 6000K bright white light, giving your car that added style with power and illumination with the latest LED lighting trend. Brighten up your vehicle interior lighting and go from yellow to white light with Philips Vision LED. |
Exterior lighting: Fast response timeVision LED lights illuminate instantly with an intense red light for stop/tail lights. That means when you brake, the vehicle behind you can react immediately. The instant-on capability of the Vision LED lights can actually reduce braking distance by up to 20 feet at 75 mph. For back-up lighting, the brilliant 6000K bright white light immediately stands out and is perfect for cars with back-up cameras, by illuminating the view behind you. |
Street-legal LEDsFirst to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs. They are street-legal because their ground-breaking design allows the light beam to be focused exactly where it’s needed, on the road. |
Philips Vision LED: FAQ
What are the benefits of Philips Vision LED?
Its groundbreaking design is what makes Vision LED stand out. Light output of an LED bulb is not necessarily related to the number of LEDs mounted on the bulb, but it is all about filament position. By mounting the LEDs in filament position, we get the maximum light output on where it needs to be, on the road. This filament position allows us to meet the light output of an incandescent bulb, thus make them street-legal. In addition, due to its design, the LEDs are extremely robust and shock- and moisture proof and capable of handling voltage surges without failure.
My LED Doesn’t Light Up After Installation. Why Does This Happen and How Can I Solve This?
If your LED doesn’t light up, its likely that you need to flip the LED.
Why does this happen?
Regular incandescent bulbs can draw current in either direction, there are no ‘positive’ or ‘negative’ sides on the bulb. The bulb will work regardless of which direction it is inserted. LED bulbs, however, only draw current in one direction. Basically, this situation can be compared to batteries that have a positive and negative side. So if the LEDs are inserted incorrectly, they will not work. The solution is to simply flip the LED!
Follow these steps to reverse the polarity:
1. Remove the LED from the socket.
2. Flip the LED.
3. Insert LED back into the socket.
4. Check to ensure the LED lights up.
After Installation: I Notice Fast Flash or Dashboard Errors About a Failing Bulb. What Should I Do?
Error messages appear because the LED bulb wattage is much lower than conventional bulbs, which can make an outage warning system unable to detect the bulb.
If your car has a dashboard error message, experiences fast flash or goes in limp mode upon installation of an LED bulb, you may consider to purchase and install a Philips Vision LED CAN-bus warning canceller solution.
The 5W CAN-bus is used for interior applications, and license plate lighting. The 21W CAN-bus is used for exterior applications.
The post Philips Vision LED for Any Vehicle appeared first on The Dunshies.
]]>The post amazing deal on foam cannon appeared first on The Dunshies.
]]>
- ☆Adjustable Snow Foam Lance with 1/4″ quick disconnection fitting.Capacity:0.22 Gallon(1L) .
- ☆Requires pressure washer to Have 2.0GPM & Over 1000 PSI Pressure for use.Requires pressure: 70BAR – 1000PSI; Maximun pressure: 200BAR – 3000PSI; Maximum flow:5.3Gpm.
- ☆Foam Lance core is made of quality brass.The main body is solid brass and is heavy. There are (2) adjustment’s that allow you to dial-in the sprayer for any situation: top dial is for foam dispensing amount and the nozzle adjusts the spray pattern (wide to narrow). The plastic container holds about a quart of liquid soap.
- ☆Variable, adjustable spray nozzle for accurate mixing and foam generation.Turn the top knob right / closed to get the thickest mixture, adjust the nozzle to get a proper spray pattern, and let it loose.
- ☆Multiple use: Car, Motorcycle Washing, floors,Windows washing, Driveways, Roofs, Siding washing and so on.Ideal for enthusiast or professional use.It can be directly connected with the gun on the pressure washer gun.
http://amzn.to/2wNjWyZ
The post amazing deal on foam cannon appeared first on The Dunshies.
]]>The post Torq Foam Cannon vs Generic Foam Cannon appeared first on The Dunshies.
]]>Today Im washing my 2017 Ford Raptor and comparing a generic hardware store foam cannon to the Chemical Guys Torq Foam Cannon.
Torq Foam Cannon vs Generic Foam Cannon
Not a fair comparison? Well if you only have $80, then it should be an option. The Generic one came with my super cheap Greenworks power washer purchased from a hardware store. Its a 1600psi 1.2gpm which is arguably not enough for sufficient foam. BUT as you will see it works really well and produces a thick foam.
First off, If you havent already, PLEASE subscribe to our YouTube channel, it helps of get more traffic and our videos actually help us support things we do.
here are the details:
Pressure washer kit
Greenworks-1-600-PSI-1-2-GPM-Cold-Water-Electric-Pressure-Washer
Your Support help us! How?
We “the Dunshies” are partnering with companies with products we use and like ourselves. Those companies offer us discount links providing you with THE BEST deals on their products, they pay us a small commission every time someone uses the link. This helps us provide more content for you to enjoy. So please use the link for your order of Chemical Guys
SHOP NOW
Buy any Chemical Guys products from these links.
The Torq cannon and Torq rotary tools
TORQ Tools
TORQ PROFESSIONAL FOAM CANNON & HONEYDEW SNOW FOAM AUTO WASH (1 GAL)
Soaps, Shampoos & Car Wash Products on ChemicalGuys.com
Shop Chemical Guys Micro Fiber towel deals
Microfiber Towels
Coupon Deals for Chemical Guys
Coupons on ChemicalGuys.com
The post Torq Foam Cannon vs Generic Foam Cannon appeared first on The Dunshies.
]]>The post Crashed it TWICE update appeared first on The Dunshies.
]]>Longer video with more flying footage from the DJI MAVIC PRO
Watch me CRASH my new DJI Mavic Pro Drone TWICE in one day while filming my 2017 Ford F150 Raptor in the Arizona Desert.
Why did I crash? Im going to put the “follow me” function to the test, these are solo trips. Im driving, running the camera and “trying” to spot trees etc.
Im carving out a little time every couple of days between work meetings to get out and enjoy my Raptor offroad (where it should be) and improving my video skills.
The post Crashed it TWICE update appeared first on The Dunshies.
]]>The post Crashed it TWICE appeared first on The Dunshies.
]]>Watch me CRASH my new DJI Mavic Pro Drone TWICE in one day while filming my 2017 Ford F150 Raptor in the Arizona Desert.
Why did I crash? Im going to put the “follow me” function to the test, these are solo trips. Im driving, running the camera and “trying” to spot trees etc.
Im carving out a little time every couple of days between work meetings to get out and enjoy my Raptor offroad (where it should be) and improving my video skills.
The post Crashed it TWICE appeared first on The Dunshies.
]]>The post First Flight with DJI Mavic Pro appeared first on The Dunshies.
]]>This is my second video showing some of the footage from my Mavic Pro’s first flight. This is soo fun AND easy to fly. The Mavic has to be one of the best drones available right now for the money. I’ll get a lot better the more I use it. Keep watching for more videos. PLEASE SUBSCRIBE. thx
The post First Flight with DJI Mavic Pro appeared first on The Dunshies.
]]>The post I Purchased a DJI Mavic Pro appeared first on The Dunshies.
]]>Excited to announce I just purchased a New DJI Mavic Pro. I will be using in this real estate videos, Raptor upgrades & Reviews, and all kinds of outdoor activities.
Please like and subscribe, 3-5 videos a week published and a new series dedicated to The DJI Mavic Pro
The post I Purchased a DJI Mavic Pro appeared first on The Dunshies.
]]>